kitpl www.vishay.com vishay mcb revision: 10-mar-17 1 document number: 32546 for technical questions, contact: mcbprecisionpot@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 kit potentiometer linear analog displacement sensor features ? conductive plastic potentiometer technology, infinite resolution ?analog ? low height ? substrate: stratified, insulate d, rigid, high temperature ? wiper: multicontacts, precious metals ? applicable standards: nfc 93255, mil r39023 ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 quick reference data sensor type linear, conductive plastic output type output by wires market appliance ind ustrial, avionics dimensions 38 mm, 41 mm, 61 mm, 85 mm, 93 mm, 106 mm, 345 mm electrical specifications parameter kitpl038 kitpl041 kitpl061 kitpl085 kitpl085 (rx13-75) kitpl093 kitpl106 kitpl345 (rx13-300) total electrical travel 29.8 mm 18 mm 38 mm 50 mm 75 mm 58 mm 19 mm 300 mm useful electrical travel 28 mm 8 mm 28 mm 47 mm 70 mm 55 mm 18.7 mm 300 mm independent linearity 0.2 % 0.14 % 0.07 % 0.1 % 0.1 % 0.1 % 5 % 0.1 % total resistance range (r n ) 4.7 k ? 4.7 k ? 4.7 k ? 4.7 k ? 4.7 k ? 4.7 k ? 1.13 k ? 10 k ? tolerance on r n + 10 % - 2 % 20 % 20 % 20 % 20 % 20 % 11 % 20 % output smoothness < 0.1 % < 0.3 % < 0.2 % < 0.1 % < 0.1 % < 0.1 % < 0.1 % < 0.1 % power rating at 70 c 0.15 w 0.27 w 0.57 w 0 .15 w/cm 0.15 w/cm 0.15 w/cm 0.15 w/cm 0.15 w/cm temperature coeffici ent -300 300 ppm/c wiper current ? 1 ma recommended load impedance ? 1000 r n insulation resistance 1 g ? at 50 v cc ? 10 g ? at 500 v dc dielectric strength 750 v rms , 50 hz, 1 min 500 v rms , 50 hz, 1 min mechanical specifications parameter maximum displacement speed 1.5 m/s displacement force ? 0.08 n
kitpl www.vishay.com vishay mcb revision: 10-mar-17 2 document number: 32546 for technical questions, contact: mcbprecisionpot@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? nothing stated herein shall be construed as a guarantee of quality or durability. note ? standard = analog output performance parameter kitpl038 kitpl041 kitpl061 kitpl085 kitpl085 (rx13-75) kitpl093 kitpl106 kitpl345 (rx13-300) operating temperature range -35 c to +120 c -40 c to +105 c storage temperature range -46 c to +71 c -40 c to +105 c rotation humidity (max.) 5 % to 95 % life 10m cycles sap part numbering guidelines model type size function value linearity packaging 3 digits kitp l = linear 038 1 472 = 4k7 l = 0.2 % b = box (1 piece) to consult vishay for dedicated 3 digits 041 061 u = see electrical specifications 085 093 d = 0.1 % 106 112 = 1k1 u = see electrical specifications 345 103 = 10k d = 0.1 % - dimensions in millimeters kitpl038 2.5 0.15 8.5 1.5 11 ? 1.4 1.4 2.4 1.5 max. 10 0.1 5 0.1 a a a-a 8 white red blue 700 total electrical travel (tet) electrical continuity travel (ect): 32.2 38.7 max. u s eful electrical travel (uet) s heath length 32 min. s hield cable 3 wire s
kitpl www.vishay.com vishay mcb revision: 10-mar-17 3 document number: 32546 for technical questions, contact: mcbprecisionpot@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 kitpl041 kitpl061 dimensions in millimeters 3 wire s aw g 26 yellow (-) g reen (+) red (collector) 8 min. (ceu) 3 max. 2 0.1 (x 2) ? 2.6 0.1 (x 2) ? 5.2 0.1 (x 2) 41.1 0.5 3.175 0.2 18 (cet) 14.2 0.2 1 max. 7.1 0.1 300 10 3.6 0.2 11.2 0 - 0.2 4.7 0.2 4.5 0.2 32.1 0.2 r4.7 0.2 yellow (-) g reen (+) red (collector) 3 max. 2 0.1 (x 2) ? 2.6 0.1 (x 2) ? 5.2 0.1 (x 2) 61.1 0.5 3.175 0.2 38 (cet) 28 min. (ceu) 14.2 0.2 1 max. 7.1 0.1 300 10 3.6 0.2 11.2 0 - 0.2 4.7 0.2 4.5 0.2 52.1 0.2 3 wire s aw g 26 r4.7 0.2
kitpl www.vishay.com vishay mcb revision: 10-mar-17 4 document number: 32546 for technical questions, contact: mcbprecisionpot@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 kitpl085 kitpl085 (rx13-75) wiper on request dimensions in millimeters 3 wire s aw g 26 yellow (-) red (+) g reen (collector) 12 0.2 6 0.1 ? 5.2 0.1 (x 2) 2 0 - 0.1 (x 2) ? 1.7 0 - 0.1 (x 2) ? 2.6 0.1 (x 2) 3 max. 3.175 0.2 0.5 0.2 3 0.15 4.5 0.2 76 0.2 85 0.5 300 10 5 0.2 15.5 0.2 17 0.2 50 (cet) 47 min. (ceu) 14 0.2 6 0.2 10 0.2 2 0.2 2 0.2 13 0 - 0.1 4.1 max. (x 3) 80 85 0.2 2.5 4 5 collector track axi s of wiper 6 3.5 2.5 0.05 (x 2) 1.5 + 0.2 0 (x 2) 3.3 (working po s ition) 5 16.5 11 9 ? 1.7 1 0.1 4.5 2.5
kitpl www.vishay.com vishay mcb revision: 10-mar-17 5 document number: 32546 for technical questions, contact: mcbprecisionpot@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 kitpl093 kitpl106 dimensions in millimeters a-a 3 max. 3.175 0.2 12 0.2 58 (cet) 55 min. (ceu) a a yellow (-) g reen (+) red (collector) 300 10 ? 2.6 0.1 (x 2) ? 5.2 0.1 (x 2) 3 wire s aw g 26 6 0.1 4.5 0.2 84 0.2 93 0.5 17 0.2 5 0.2 15.5 0.2 2 0 - 0.1 (x 2) a a a-a 6.5 3 2.1 3.5 3.5 r 8 78 10 area marking r 2.1 total electrical travel (tet) 1.05 track collector axi s of wiper 1 4 1.05 reference s 6.5 1.8 6 6 1.8 0.8 max. 13 0.2 5 3 x ? 0.6 0.1 106 0 - 0.2
kitpl www.vishay.com vishay mcb revision: 10-mar-17 6 document number: 32546 for technical questions, contact: mcbprecisionpot@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 options (on request) ? other ohmic values (r n ) ? other tolerances on r n ? other linearities: ? kitpl085 0.04 % (2.5 mm to 14.5 mm) else 0.1 % ? other theoretical electrical travels ? other dimensions dimensions in millimeters kitpl345 and other on request type tet max. uet min. l1 0.1 l2 0.5 kitpl070 26 25 65 69.5 kitpl095 51 50 90 94.5 kitpl145 102 100 140 144.5 kitpl195 152 150 190 194.5 kitpl245 202 200 240 244.5 kitpl295 252 250 290 294.5 kitpl345 302 300 340 344.5 kitpl445 402 400 440 444.5 a a a-a tet (total electrical travel) uet (u s eful electrical travel) l1 l2 8 2.6 4.7 reference s axi s of wiper 4.75 5 6 tin s oldering tin s oldering ? 5.2 ? 2.6 3 1.2 4.3 track collector 12 0 - 0.4
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
